Logo-ofs

In Today’s environment, it is critical that your organization has cost-effective communication solutions that meet the highest standard of reliability. That is where OFS excels - providing cutting-edge fiber optic technologies at the best value.

RED can offer OFS AllWave, TrueWave, UltraWave, MidiaX, PowerGuide, AccuRibbon, Loose Tube, Figure 8 fiber cables.
Transoceanic Submarine fiber - UltraWave SLA/IDF and TrueWave XL/SRS, LGX-Optical Distribution Frames, Splice cabinets, Preconnectorized Cabinets and Cables, Splitters, WDM, Patchcords, Pigtails, Adapters, Attenuators, Fusion Splicer, Fiber Cleaver, Fiber Stripper

RED FIBER CABLE INVENTORY  
RED FIBER CABLE INVENTORY 2013

RED - Rivera Engineering and Design FIBER CABLE LOOSE TUBE

LOOSE TUBE FIBER CABLE

RED - Rivera Engineering and Design FIBER CABLES

LOOSE TUBE ARMORED FIBER CABLE


Fortex™ DT Loose Tube Cable, Single Jacket and Armored
The Fortex DT Loose Tube cable is a completely dry cable offering superior handling and excellent durability for a broad range of applications. It delivers the rugged durability and reliability essential for outside plant use in an innovative, totally dry cable design. By eliminating messy gels and filling compounds, the Fortex DT cable can streamline cable handling and installation.



Figure 8 fiber cable

FIGURE 8 FIBER CABLE


DryBlock® Figure 8 Loose Tube Cable, Single Jacket and Armored
The DryBlock® Figure 8 Loose Tube Fiber Optic Cable offers an attractive alternative for aerial cabling installations with demanding loading conditions. An integrated, extra-high-strength (EHS) stranded steel messenger offers strength and corrosion resistance that is superior to that of common utility-grade messengers. The Figure 8 Cable also helps save on time and money with rapid, one-step installation.




ADSS PowerGuide Fiber Cable

ADSS POWERGUIDE FIBER CABLE


PowerGuide® All-Dielectric Self-Supporting (ADSS) Cable
The PowerGuide ADSS cable is today's high-performance choice for long span aerial applications (up to 3,281 feet/1,000 meters). With fiber counts up to 288 (up to 864 in AccuTube design), OFS PowerGuide cables, custom-designed and engineered for zero fiber strain, require no preinstalled messenger and are quickly installed in a single pass normally without interrupting service.



Fiber ShelvesPrterminated fiber shelves

PRETERMINATED FIBER SHELVES


PreTerminated Shelves
Pre-Terminated Shelves - LGX System shelves allow considerable installation timesavings and high-quality optical performance, which can be provided with customized cable type and length.




Fiber splicing shelves

FIBER OPTIC SPLICE SHELVES


Splice Shelves- LGX System shelves used to splice fiber cables to pigtails and store fiber slacks. There are two sizes of rack mount splice shelves:  the 3U (5 inch ) splice shelf houses 144 splices and the 4U (7 inch) splice shelf houses 288 splices.  They both utilize the LT1B splice trays with single fusion, mechanical or mass fusion splice organizers.



Splice Tray and Splice Organizer

SPLICE ORGANIZER


Splice Organizers
are accessories to protect and organize fiber fusion or mechanical splices and store fiber slacks, available for single, mass and mechanical splices. The single fusion splice organizer has 3 trays that hold 16 single fusion sleeves each for a total of 48 splices per organizer.  The mass fusion trays hold 6 mass fusion splices each for a total of 18 mass fusion splices per orgainzer.



LGX Bay Frames OFS

LGX BAY FRAMES

LGX Fiber Distribution Bay Frames
OFS fiber distribution systems are designed to provide termination, connection, splice and access points for fiber optic circuits. Flexibility and ease of reconfiguration are the capstones of the OFS LGX® Fiber Distribution System. 




Fiber Orbital splice cabinet

ORBITAL SPLICE CABINET

The ORBITAL cabinet is used at the customer premise to provide distribution of the fiber from the outside plant network to the customer premise. The 1X32 splitters are housed in the Oribital box and connected through the MPO fanout.
  • Dimensions (in inches):
    160 - H X 24 W X 18 D
    288 - 36 H X 24 W X 18 D
    576 - 36 H X 48 W X 18 D
  • Serve up to 160, 288, or 576 homes
  • Full front access solution
  • Minimizes fiber routing congestion
  • NEMA 4 rated
  • Rear cable storage eliminates underground vault and closure
  • Aluminum construction with powder coated paint finish
  • Internal wall separates fiber storage area from equipment bay
  • MPO 1X32 splitter creates a high-density, low-loss splitter solution



Patchcords and Jumpers Fiber

JUMPERS and PIGTAIL


OFS manufactures a variety of fiber optic jumpers. This includes 3.0 mm and 1.6 mm simplex and duplex jumpers. Jumpers range from standard multimode and single-mode to high performance single-mode and multimode.
OFS offers a variety of pigtails from Single-mode (SM), 62.5 um and 50 um Multimode (MM) to high performance LaserWave Multimode fiber. Pigtails are available on 900 um buffered fiber, 900 um strengthened buffered fiber, 2.0 mm cordage connectorized on one end, 1.6 mm cordage connectorized on one end and 3.0 mm cordage connectorized on one end. Jumpers and Pigtails are available with SC, ST, FC and LC connectors.




Mini LXE Drop cable

MINI LXE and DIELECTRIC DROP CABLE

LightPack® Mini-LXE and Dielectric Drop Cables
The Mini-LXE and Dielectric Drop cables are compact rugged fiber cables for the last optical link of your network. Their size-optimized design (for a maximum of 18 fibers) provides a more efficient cost-effective solution for smaller fiber counts. The outer jacket consists of medium density polyethylene to improve protection in the rugged outside plant environment.



Fiber Drop cable

POWERGUIDE TTH CABLE


PowerGuide® TTH
The PowerGuide TTH Cable is an all-dielectric self-supporting cable designed for  short spans up to 300 ft.  Its small diameter and low cost of installation make it an ideal solution for duct, FTTx, and aerial drop applications.




Fiber Drop cable

MINI C2 CABLE


Mini C2™ Cable
The Mini C2 Cable is a compact and cost-effective 2700N (600lb) rated armored cable. Size-optimized for a maximum of  12 fibers, this small lightweight design helps reduce deployment costs, and facilitates easy handling and installation. The Mini C2 cable is suitable for underground conduit and rugged direct buried applications.


Flat Drop Fiber cable

FLAT DROP CABLE

Mini LT Flat Drop Cable
The small, lightweight Mini LT Flat Drop Cable offers an ideal solution for the smaller fiber counts that are needed in the final sections of an optical network, particularly in a fiber-to-the-premise (FTTx) installation.  The buffer tube fiber core offers easy access and a familiar design for customers who are accustomed to working with loose tube cables.

OFS accuflex cable

ACCUFLEX CABLE

Riser Rated ACCUMAX® Distribution Cable
Riser rated ACCUMAX® Distribution Cables includes fiber counts from 2 to 72, RoHS-compliant, single-mode and multimode fiber available. Hybrid LGCC cables with multiple fiber types are available upon request.



Fiber breakout cable

MINI-CORD CABLE

MiniCord Breakout Cable
MiniCord Breakout Cable with Single-mode fiber, in 2 to 72 1.6mm cordage subunits


S178A
S178 Hand-Held Core-Alignment Fusion Splicer
The S178 Fusion Splicer is your logical choice for a wide range of uses including FTTX, LAN, backbone, enterprise, long-haul installations, data-center and/or OEM applications. It is also an excellent option for use in the conventional telecommunications industry, along with other industries (including oil and gas).
Features:
  • Rugged and compact handheld design endures harsh environmental conditions
  • Fast splicing (7 seconds) at super low loss and fast heating (25 seconds)1
  • 200 cycles (splicing & heating) with new battery confi guration
  • Available for all METRO/LAN/FTTX fibers including ultra bend-optimized fibers (e.g. EZ-Bend® Fibers)
  • Splicer is compatible with the OFS, Diamond2 and Seikoh Giken3 Splice-on-Connectors (SOC)
  • Easy maintenance Easy electrode replacement/ mirror-free alignment system
  • Easy software upgrade via the Internet
  • Easily exchanged fiber holder systems (tight holder/fiber holder/SOC holder)
  • PC interface software to allow user management of splicing recipes and results
  • Auto-start shrink sleeve oven feature
  • Improved GUI to further enhance ease of use
  • Large memory for storage of splice data (2,000) and images (100)
  • RoHS compliant
Standard Package Includes:
  • S178A Main Body
  • Hard Carrying Case
  • Spare Electrodes
  • AC Adapter for S178
  • AC Cable Cord
  • Electrode Sharpener
  • Cleaning Brush
  • User Manual




fiber cleaver
FITEL S325A FIBER CLEAVER
This compact unit delivers speed and precision. With a single button, you complete a secure cleave and the waste fiber is automatically collected. Excellent for hand-held and work bench use. Performs 32,000 cleaves.
Features:
  • One-step action
  • Easy fiber loading, all fiber types, single to 12-fiber ribbon
  • Simple operation for all technicians
  • High capacity waste fiber collection
S325A Model Includes:
  • S325X-01 S325A Cleaver Main Body
  • S325X-02 Soft Carrying Case
  • S325X-03 Normal Fiber Waste Bin
  • S325X-04 Single Fiber Adapter
  • S325X-05 Large Capacity Fiber Waste Bin
  • FTS-B277 Operation Manual
Fiber stripper
S211B FIBER STRIPPER
The S211B Single Fiber Stripper features 3 holes for precise stripping of your optical fiber. This unit is optimized for 250- and 900-micron coated fibers. A 3rd hole is ideal for stripping fiber cordage. The S211 features extremely accurate hardened jaws and is ideal for field splicing applications.